CAD FUNDAMENTALS / START HERE

What is CAD? A clear introduction for beginners.

CAD stands for computer-aided design. It describes using software to create and edit drawings or models with measurements, geometry, and repeatable precision. If you are completely new, start with a few lines and a rectangle—not a complicated building or machine.

By Jesse Velazquez · CAD designer with 20+ years of hands-on experience

What does CAD actually do?

Think of CAD as a measured workspace. Rather than drawing an approximate rectangle by eye, you can specify its exact width and height, align other shapes with its corners, and add dimensions someone else can read.

Drafters, designers, engineers, architects, and production teams use CAD in different ways. Some prepare 2D plans and cutting layouts; others design three-dimensional parts or assemblies. A CAD file does not automatically make a design safe, manufacturable, or approved—it still needs human judgment and review.

2D CAD versus 3D CAD

CADstart teaches foundational 2D CAD and drafting. It is not a replacement for a full 3D parametric modeling system.

  • 2D CAD focuses on lines, arcs, shapes, notes, dimensions, and views such as plans, elevations, and cutting layouts.
  • 3D CAD represents depth and volume, often using solids or surfaces that can be rotated and viewed from different angles.
  • Many workflows use both: a 2D sketch communicates key measurements, while a separate 3D model may help visualize assembly or shape.

Five CAD concepts worth learning first

  • Units: Decide whether the drawing uses inches, millimeters, or another unit before entering measurements.
  • Coordinates: X and Y identify positions; the origin is the point (0, 0).
  • Object snaps: Endpoint and midpoint snaps help connect geometry accurately rather than almost touching.
  • Layers: Organize outlines, dimensions, annotations, and construction guides.
  • Dimensions: Display sizes and distances so the drawing communicates more than its appearance.

Try your first CAD exercise

You can practice these ideas in a browser-based 2D CAD workspace. The goal is learning the concepts, not memorizing every button on day one.

  1. Choose your drawing units and create an OUTLINE layer.
  2. Draw a rectangle 100 units wide and 60 units high. Accuracy matters more than how large it looks on screen.
  3. Add a circle with a radius of 10 units centered inside the rectangle.
  4. Use an endpoint or midpoint snap to connect a short line accurately.
  5. Create a DIMENSIONS layer and annotate the rectangle's width and height.
  6. Check the result: does every dimension describe the geometry you actually drew?

What should you learn after the basics?

Next, practice Ortho constraints, Move, Copy, Offset, Trim, and Extend. Then try a small drawing with labels, line styles, and dimensions. A good beginner sequence moves from one accurate shape to a simple organized drawing.

CADstart combines a guided fundamentals course with an interactive 2D drawing workspace. There is a free demo if you want to try drawing before choosing a paid course.

READY TO DRAW?

Put these fundamentals into practice.

Start with the free CADstart demo and decide whether the guided 2D course is for you.

See CADstart & the free demo →